High-Throughput Analysis for Artemisinins with Deep Eutectic Solvents Mechanochemical Extraction and Direct Analysis in Real Time Mass Spectrometry
Wang, JQ (Wang, Jiaqin)[ 1 ] ; Zhou, YY (Zhou, Yanying)[ 1 ] ; Wang, M (Wang, Man)[ 1 ] ; Bi, WT (Bi, Wentao)[ 1 ]*(毕文韬); Li, HL (Li, Hongli)[ 1 ]*(李红丽); Chen, DDY (Chen, David Da Yong)[ 1,2 ]*
[ 1 ] Nanjing Normal Univ, Coll Chem & Mat Sci, Jiangsu Key Lab Biomed Mat, Jiangsu Collaborat Innovat Ctr Biomed Funct Mat, Nanjing 210023, Jiangsu, Peoples R China
[ 2 ] Univ British Columbia, Dept Chem, Vancouver, BC V6T 1Z1, Canada
ANALYTICAL CHEMISTRY,201803,90(5),3109-3117
A fast, simple, efficient, and high-throughput analytical protocol using deep eutectic solvents (DES) for mechanochemical extraction (MCE) combined with direct analysis in real time mass spectrometry (DART-MS) was developed to quantify heat-labile bioactive compounds artemisinin (AN), arteannuin B, and artemisinic acid from Aretemisia annua. MCE is performed at room temperature, and target analytes are released into DESs within seconds; this method demonstrated multiple advantages over traditional extraction methods and organic solvents. DART-MS was then used for the structure confirmation and quantification for the three artemisinin major components extracted from plants of five locations. Liquid chromatography (LC) measurements were performed as well for results verification and comparison, and the amounts obtained were consistent between the two techniques. DART-MS showed advantages in simplicity, low limit of detection (5-1.5 ng mL(-1)), and superior speed (10-20 s), but with slightly higher relative standard deviation (0.7-10.8%). The entire protocol can be accomplished in a few minutes from raw materials to quantitative results. This study aims to establish a methodology combining high-efficiency sample pretreatment and rapid chemical analysis from complex matrixes, where the time-consuming separation procedure can be eliminated. Additionally, the use of toxic organic solvents needed in the process of chemical extraction and analysis is largely avoided. In general, this investigation provides a robust analytical procedure that can be widely used in many areas of research and industrial activities.
文章链接:
https://pubs.acs.org/doi/10.1021/acs.analchem.7b04060
版权与免责声明:本网页的内容由收集互联网上公开发布的信息整理获得。目的在于传递信息及分享,并不意味着赞同其观点或证实其真实性,也不构成其他建议。仅提供交流平台,不为其版权负责。如涉及侵权,请联系我们及时修改或删除。邮箱:sales@allpeptide.com